| 翻訳と辞書 |
| Attenuation-to-crosstalk ratio ： ウィキペディア英語版 |
Attenuation-to-crosstalk ratio
Attenuation-to-crosstalk ratio (ACR) is a parameter that is measured when testing a communication link, which represents the overall performance of the cable.〔(), Learning Path: Testing network cable.〕 ACR is a mathematical formula that calculates the ratio of attenuation to near-end crosstalk for each combination of cable pairs.〔(), Testing Copper Cabling the Right Way.〕 ACR is expressed as a figure in decibels (dB), between the signal attenuation produced by a wire or cable transmission medium and the near-end crosstalk (NEXT).〔(), attenuation-to-crosstalk ratio (ACR) or headroom.〕 In order for a signal to be received with an acceptable bit error rate, the attenuation and the crosstalk must both be minimized.〔 Crosstalk can be reduced by ensuring that twisted-pair wiring is tightly twisted and is not crushed, and by ensuring that connectors between wire and cable media are properly rated and installed.〔
Positive ACR calculations mean that transmitted signal strength is stronger than that of near-end crosstalk.〔(), De-Mystifying Cabling Specifications - Important Definitions.〕 ACR can be used to define a signal bandwidth (e.g. 250 MHz for category 6 cable) where signal to noise ratios are sufficient to support certain applications.〔 The maximum frequency for which positive ACR is assured provides a benchmark to assess the usable bandwidth of twisted-pair cabling systems.〔 EIA/TIA specifies specific values for ACR in order to meet the various categories of cable.〔(CAT 6 Testing Requirements )〕
==See also==
*Crosstalk (electronics)
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Attenuation-to-crosstalk ratio」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|